Design Document

Specific notes from Jeremy.

1. They want the home page called overview. It makes scense and they want it that way.
2. Round on off buttons is what they want as opposed to switches.

UI design

2. Alarms are going to go through Alarms portion of Display Pro.
   1. Enable and Disable alarms.
   2. Alarms showing up in warning lights.
3. Use templates whenever possible.
4. Switches need to be fixed set.
5. Special buttons for Open and Closed.
6. White are input sections.
7. Export functionality needs to be looked into.
   1. Jeremy gave me the document on Standard Operating Procedure for Camile Scada Data Extraction - Data Management.
8. Use templates for UI whenever possible.
   1. Go through everything with Stream 1.
9. Charts
10. Map out all the pages and note what is on each page.
11. Control pages
    1. Look at what each one does figure it out.
    2. Most of these are copies of other data from other locations.
    3. Map out each page and note what is on each of the control pages.

Notes on Pages

Overview

This is the most complicated page. It has the most tags of any page.

Overview Inputs

• Stream Set points 16 set points 2 for each stream.
• Pressure Alarm Limit 16 points
• River Flow
• River Turbidity
• RO Flow
• RO System Speed

Overview Buttons and switches

Buttons

These are buttons that they would like to keep as buttons

• Butterfly Valves Open
• Chem Pumps Off
• Start and Stop Inflows 1 and 2

These are buttons that they don't care if they go to switches I will be verifiying what is standard for Scada Systems.

• Enable and Disable Light Meter alarms
• Water Quality Alarms
• Chem Pump Alarms

Other Buttons

• Precipitation Reset
• RD Delivery Pump
• Recirc Flow also a button but does not do anything.
• Reset Interlocks

Switches

• River Flow
• River Triubity
• RO Flow
• 6 grow lights

Overview Display

This page is divided into sections

• River water Intake
• EDMR 001 Outflow
• Weather Conditions
• Interlock Section
• Grow Lights Section
• 8 Streams

Overview Special Notes

The valve image is in Blue or green apparently. I am not sure what tag it is set to but it apparently changes color.

Stream Pages

There are 8 stream pages one for each stream. They are all the same by design.

Stream Inputs

• Stream Set points 1 & 2 Inflow.
• Stream Set points 1 & 2 Recirc Flow

Stream Display

Stream Buttons and switches

Stream Buttons

• Inflow buttons
• Recirc Flow
• Overhead for power drops.
• Tail Tank for power drops.

Stream Special Notes

OP% Mode Manual OP% are

Stream Trend Graphs Pages

There are 8 stream Trend graphs pages one for each stream. They are all the same by design.

Stream Trend Graph Display

There are 2 charts. They are both line charts.

• Flow 1 (gpm)
• Flow 2 (gpm)
• Conductivity
• DO (%)
• ORP
• pH
• Temperature (deg C)
• Turbidity
• Recirc Flow (gpm)
• Nitrate (mg/L)

Stream Special Notes